Hello, is anyone having trouble with this or know how to possibly fix it? After transmitting/receiving about 10MB of data, packets just stop being sent or received. The shownetstatus and getnetstatus continue to show a good connection and an IP address assigned to the device (V2ExpEth in my case). But packets simply no longer flow.
I am running AmiKit with AmigaForever8, Roadshow 1.14 (paid for) on a Vampire 2.3 V500 card.
Thank you,
Daniel
Navigation
«
«
«
Amiga Future
«
Community
«
Knowledge
«
Last Magazine
«
Service
«
Search
«
Social Media
«
Advertisement
«
Partnerlinks
Roadshow 1.14 stops transmitting/receiving packets after 10MB of data
Support Roadshow
-
- Grade reingestolpert
- Posts: 3
- Joined: 26.01.2021 - 19:57
Roadshow 1.14 stops transmitting/receiving packets after 10MB of data
Post by npagonis73 »
Unfortunately nobody replies in here. I have the post below you for days and not even 1 word has been said.
Re: Roadshow 1.14 stops transmitting/receiving packets after 10MB of data
What do the network interface stats say when this happens? Entering shownetstatus interfaces will show the exact name of the network interface you are using. Use this name with the shownetstatus interface name to print the interface packet counters, etc. Now open a shell window and enter the command ping 8.8.8.8 which should send and receive packets through that interface. If that no longer works (after 10 MBytes of data have been transmitted), please use the shownetstatus interface name command to query the packet receive/send counters. I'd like to know what you find.geekpower wrote: ↑27.01.2021 - 19:18 Hello, is anyone having trouble with this or know how to possibly fix it? After transmitting/receiving about 10MB of data, packets just stop being sent or received. The shownetstatus and getnetstatus continue to show a good connection and an IP address assigned to the device (V2ExpEth in my case). But packets simply no longer flow.
I am running AmiKit with AmigaForever8, Roadshow 1.14 (paid for) on a Vampire 2.3 V500 card.
Thank you,
Daniel
Re: Roadshow 1.14 stops transmitting/receiving packets after 10MB of data
Hi,
i have the same problem on my Amiga 600 (ClassicWB 68k with WB 3.1) . I have a Furia along with an 1MB chip memory extension installed.
After ~20 MB no further files are copied.
This is what shownetstatus interface 3c589 shows in that state:
I hope this helps to solve the problem
i have the same problem on my Amiga 600 (ClassicWB 68k with WB 3.1) . I have a Furia along with an 1MB chip memory extension installed.
After ~20 MB no further files are copied.
This is what shownetstatus interface 3c589 shows in that state:
A ping to my routers ip returns: unknown error codeSchnittstelle "3c589"
Gerätetreiber = 3c589.device
Gerätenummer = 0
Geräteadresse = 00:50:04:5C:BE:C0
Maximale Übertragungseinheit (MTU) = 1.500 Bytes
Übertragungsgeschwindigkeit = 10.000.000 Bit/Sekunde
Gerätetyp = Ethernet
Versandte Datenpakete = 6.466
Empfangene Datenpakete = 22.675
Verworfene Datenpakete = 0 (ein = 0, aus = 63)
Pufferüberläufe = 0
Unbekannte Datenpakete = 2.889
Adresse = 192.168.178.38
Netzmaske = 255.255.255.0
Anzahl aktiver Leseanfragen = 36 (davon waren maximal 17 aktiv, 36 sind derzeit aktiv)
Anzahl aktiver Schreibanfragen = 32 (davon waren maximal 32 aktiv, 32 sind derzeit aktiv)
Bytes empfangen = 19.754.143
Bytes versandt = 613.343
Übertragungsstatistik (Empfang/Versand) = DMA:0/1.443 Byte:19.786/5.023 Wort:-/0
Art der Adresszuweisung = Dynamisch
Adressreservierung verfällt = 18.02.21 11:38:54
Verbindungszustand = Aktiv
I hope this helps to solve the problem
Post Reply
4 posts
• Page 1 of 1
Jump to
- Amiga Future
- ↳ Internes
- ↳ Termine
- Computer
- ↳ Amiga und Kompatible Allgemein
- ↳ Amiga und Kompatible Spiele
- ↳ Amiga und Kompatible Hardware
- ↳ Amiga Programmieren
- ↳ Amiga Emulation
- ↳ Amiga General Chat english
- ↳ Andere Systeme
- Sonstiges
- ↳ Kleinanzeigen - Classifieds
- ↳ OffTopic
- APC&TCP
- ↳ APC&TCP-News
- ↳ APC&TCP-Support
- ↳ CygnusEd Support
- ↳ DigiBooster Support
- ↳ Roadshow Support